Steel IBCs are an indispensable part of numerous industrial supply chains. They are used, particularly in the chemical industry and industrial logistics, for the safe storage and transport of liquid substances. Due to their
high purchase costs, it is especially important for companies to maintain a constant overview of their containers. With the Packwise Smart Cap, steel IBCs can be easily integrated into a digital container management system
and monitored efficiently.
Installation is straightforward and can be completed in just a few simple steps. Extensive technical modi-
fications to the container are generally not required. Once installed, the sensor data collected can be used
via Packwise Flow 2.0 for digital monitoring and planning.
In this step-by-step guide, we’ll show you how to install the Packwise Smart Cap on a steel IBC and what
points to keep in mind during the process.
Steel IBCs are used in numerous industrial applications, particularly in the chemical industry and for the storage and transport of liquid substances. Manufacturers such as Azzini, Finncont, THIELMANN, Greif, UCON and SCHÄFER WERKE offer a variety of steel IBC solutions designed to meet the demands of industrial supply chains.
Thanks to their robust construction, durability, and reusability, steel IBCs are particularly well-suited for demanding industrial processes. At the same time, they are significantly more expensive to purchase than many conventional plastic IBCs. This makes it all the more important for companies to maintain a constant overview of their containers, their locations, and their fill levels.
Without digital support, monitoring is often done manually. Employees must inspect containers on-site and
relay information to the relevant departments. Especially when dealing with a large number of containers or multiple locations, this process can be time-consuming and prone to errors.
This is where Packwise comes in: The Smart Cap collects relevant container data and makes it available via Packwise Flow 2.0. This gives companies a better overview of their inventory and allows them to track contai-
ner movements and plan deliveries more proactively.
The first step toward digital container monitoring is the proper installation of the Smart Cap.
The installation of the Packwise Smart Cap on a steel IBC is designed so that it can be carried out without significant technical effort. Key factors include selecting a suitable mounting position, carefully preparing
the surface, and correctly securing the sensor.
Before attaching the Packwise Smart Cap, a suitable position on the steel IBC must first be selected.
For direct adhesive mounting, a sufficiently large, as level as possible surface on the top of the container
is ideal. Care must be taken to ensure that the Smart Cap can be securely fastened and is not obstructed
by closures or other structural elements.
The exact position depends on the design of the steel IBC and the specific installation requirements.
It is important that the intended surface is suitable for mounting and does not impair the sensor’s function.
In the next step , the intended mounting surface must be carefully cleaned. Particular care must be taken to ensure that the surface is completely free of dust, dirt, grease, and other residues. Contaminants can impair
the adhesive’s bonding ability and prevent the Smart Cap from remaining securely attached to the container
over the long term. After cleaning, the surface should be completely dry. A clean, dry, and as level as possible mounting surface is essential for reliable sensor attachment.
Before mounting the Packwise Smart Cap on the steel IBC, the sensor must first be activated. To do this, there
is a small magnet on the side of the Smart Cap that must be removed be. Removing the magnet activates the Smart Cap, after which it is ready to collect relevant container data and make it available for digital tracking.
On the underside of the Smart Cap is a white adhesive surface covered by a protective film. Carefully remove
this film to expose the adhesive surface. Be careful not to touch the adhesive surface with your fingers if possible. Dirt, dust, or other residues can impair adhesion and thus make attachment more difficult. After removing the protective film, the Smart Cap is ready for installation.
Once the mounting surface has been prepared, the Smart Cap can be attached. To do this, place the sensor
with the exposed adhesive surface facing down on the designated spot. Then press the Smart Cap evenly
against the container surface for about 5–10 seconds. During this step, it is important to position the sensor directly at the intended location and avoid moving it afterward. Thanks to the adhesive mounting, the Smart
Cap can be attached to the steel IBC without any additional mechanical modifications, provided the mounting surface is suitable.
After installation, check to ensure that the Smart Cap is securely seated on the steel IBC. Pay particular attention to ensure that the sensor is fully in contact with the designated surface and that there are no visible signs of detachment at the adhesive surface. If the Smart Cap is properly secured, the mechanical installation is complete.
After the mechanical installation, the next step is to digitally connect the Packwise Smart Cap to the container.
For this purpose , Packwise provides the Packwise Flow Link app, which is available via the Google Play Store
and the Apple App Store.
Using the app, the Smart Cap can be assigned to the respective steel IBC and linked to the Packwise Flow software. This ensures that the collected data can be assigned to the correct container. In Packwise Flow 2.0,
the available sensor data is then clearly displayed. This allows companies to digitally view relevant information - such as fill levels and container movements and use it for their operational processes.
In addition to this step-by-step guide, an installation video is available on our YouTube channel. In it, we clearly demonstrate how to attach the Packwise Smart Cap to a steel IBC. This allows you to visually follow the entire installation process.
Installing the Smart Cap transforms a conventional steel IBC into a digitally trackable container. Instead of relying solely on manual inventory checks or incomplete location information, companies can digitally track their steel IBCs and monitor their locations and movements.
Asset tracking offers various advantages, especially for larger container fleets:
Installing the Packwise Smart Cap on a steel IBC demonstrates just how easy it can be to get started with digital container monitoring. With the right preparation, a suitable mounting position, and careful fastening, the sensor can be installed in just a few steps.
The real added value comes from connecting it to Packwise Flow 2.0. The software makes the collected data actionable and helps companies manage inventory more transparently, streamline delivery processes, and
identify cost-saving opportunities. In this way, a simple sensor installation becomes an important step toward
an intelligent, connected supply chain.
One example of the successful use of Packwise technology is the long-standing collaboration with of the hubergroup. The internationally active company uses Packwise’s solutions for digital asset tracking
to better monitor its container inventories and container cycles. Digital tracking makes container locations
and move-ments more transparent, optimizes return processes, and enables more efficient use of existing containers. In this way, Packwise helps the hubergroup manage its container cycles more effectively and
use resources efficiently.
Learn more about the collaboration and read the hubergroup’s success story with Packwise now!
Our experts are happy to assist you with customized installation instructions and practical guidance tailored to your containers and requirements. Schedule an appointment now and discover the possibilities of digital level monitoring with Packwise!